How to Get Your Engine Information
To display valuable engine data on your Sailsense system, you'll need to connect your engine to the NMEA 2000 network. This typically involves:
- Installing an Engine Interface: A dedicated engine interface module can be installed to translate engine data into the NMEA 2000 format.
- Utilizing a Gateway: If your engine doesn't have a built-in NMEA 2000 output, a gateway device can be used to bridge the communication between your engine's existing data bus and the NMEA 2000 network.
- Professional Installation: For optimal performance and to avoid potential wiring issues, professional installation of the engine interface or gateway is highly recommended.
Once connected, your Sailsense system will be able to display a wide range of engine parameters, including:
- RPM (Revolutions Per Minute)
- Engine Hours
- Fuel Consumption
- Coolant Temperature
- Oil Pressure
How to Get Tank Information in Sailsense
To monitor fuel, water, and waste tank levels on your Sailsense system, you'll need to ensure that tank data is transmitted over the NMEA 2000 network. This can be achieved by:
- Installing Digital Tank Sensors: Replace traditional analog tank senders with digital sensors that output data in an NMEA 2000 compatible format.
- Integrating with Existing Systems: If you have an existing tank monitoring system, investigate if it can be integrated with the NMEA 2000 network.
With digital tank sensors, your Sailsense system can provide:
- Accurate Level Readings: Real-time and precise tank level measurements.
- Visual Representations: Clear graphical displays of tank levels within the Sailsense app.
- Early Warnings: Alerts for low or high tank levels, helping prevent potential issues.